# Classical electromagnetism

Classical electromagnetism is a theory of electromagnetism that was developed over the course of the 19th century, most prominently by James Clerk Maxwell. It provides an excellent description of electromagnetic phenomena whenever the relevant length scales and field strengths are large enough that quantum mechanical effects are negligible.

## Lorentz force

The electromagnetic field exerts the following force (often called the Lorentz force) on charged particles:

[itex]

\mathbf{F} = q\mathbf{E} + q\mathbf{v} \times \mathbf{B} [itex]

where all boldfaced quantities are vectors: F is the force that a charge q experiences, E is the electric field at q's location, v is q's velocity, B is the strength of the magnetic field at q's position, and c is the speed of light.

This description of the force between charged particles, unlike Coulomb's force law, does not break down under relativity and in fact, the magnetic force is seen as part of the relativistic interaction of fast moving charges that Coulomb's law neglects.

## The Electric Field E

The electric field E is defined such that, on a stationary charge:

[itex]

\mathbf{F} = q_0 \mathbf{E} [itex]

where q0 is what is known as a test charge. The size of the charge doesn't really matter, as long as it is small enough as to not influence the electric field by its mere presence. What is plain from this definition, though, is that the unit of E is N/C, or newtons per coulomb. This unit is equal to V/m (volts per meter), see below.

The above definition seems a little bit circular but, in electrostatics, where charges are not moving, Coulomb's law works fine. So what we end up with is:

[itex]

\mathbf{E} = \sum_{i=1}^{n} \frac{q_i \left( \mathbf{r} - \mathbf{r}_i \right)} {4 \pi \epsilon_0 \left| \mathbf{r} - \mathbf{r}_i \right|^3} [itex]

where n is the number of charges, qi is the amount of charge associated with the 'i'th charge, ri is the position of the 'i'th charge, r is the position where the electric field is being determined, and ε0 is a universal constant called the permittivity of free space.

Note: the above is just Coulomb's law, divided by q1, added up more multiple charges.

Changing the summation to an integral yields the following:

[itex]

\mathbf{E} = \int \rho \mathbf{r}_{unit} (4 \pi \epsilon_0 r^2) ^{-1} dV [itex]

where ρ is the charge density as a function of position, runit is the unit vector pointing from dV to the point in space E is being calculated at, and r is the distance from the point E is being calculated at to the point charge.

Both of the above equations are cumbersome, especially if one wants to calculate E as a function of position. There is, however, a scalar function called the electrical potential that can help. Electric potential, also called voltage (the units for which are the volt), which is defined thus:

[itex]

\phi_\mathbf{E} = - \int_s \mathbf{E} \cdot d\mathbf{s} [itex]

where φE is the electric potential, and s is the path over which the integral is being taken.

Unfortunately, this definition has a caveat. In order for a potential to exist [itex]\nabla \times \mathbf{E}[itex] must be zero. Whenever the charges are stationary, however, this condition will be met, and finding the field of a moving charge simply requires a relativistic transform of the electric field.

From the definition of charge, it is trivial to show that the electric potential of a point charge as a function of position is:

[itex]

\phi = q (4 \pi \epsilon_0 \left| \mathbf{r} - \mathbf{r}_q \right|)^{-1} [itex]

where q is the point charge's charge, r is the position, and rq is the position of the point charge. The potential for a general distribution of charge ends up being:

[itex]

\phi = (4 \pi \epsilon_0)^{-1} \int \rho r^{-1} dV [itex]

where ρ is the charge density as a function of position, and r is the distance from the volume element dV.

Note well that φ is a scalar, which means that it will add to other potential fields as a scalar. This makes it relatively easy to break complex problems down in to simple parts and add their potentials. Getting the electric field from the potential is just a matter of taking the definition of φ backwards:

[itex]

\mathbf{E} = -\nabla \phi [itex]

From this formula it is clear that E can be expressed in V/m (volts per meter).

## Electromagnetic waves

A changing electromagnetic field propagates away from its origin in the form of a wave. These waves travel in vacuum at the speed of light and exist in a wide spectrum of wavelengths. Examples of the dynamic fields of electromagnetic radiation (in order of increasing frequency): radio waves, microwaves, light (infrared, visible light and ultraviolet), x-rays and gamma rays. In the field of particle physics this electromagnetic radiation is the manifestation of the electromagnetic interaction between charged particles.

 General subfields within physics

• Art and Cultures
• Countries of the World (http://www.academickids.com/encyclopedia/index.php/Countries)
• Space and Astronomy